|
|
|
Spillage
Problem: Spillage
Solution: Seal
the loading area. Support the belt edge. Deflect the
material towards the center of the belt. Eliminate mistracking.
Best solution:
Install a Stephens-Adamson Sealing
System in combination with a Stephens-Adamson Impact
Station. The Impact Bar or Glide
Bar supports the belt edge, eliminating belt sagging.
For maximum wear life and best efficiency, install a Wear
Liner on the inside of the bottom of the chute and
along the skirt boards to keep material away from the
seal. Center the belt by installing a Stephens-Adamson Belt
Conductor so that the belt edge stays outside of
the seal.
|
|
|
